It is compounded with synthetic esters, anionic/non-ionic surfactants, antistatic agents and special additives. It is suitable for the high-speed spinning of polyester FDY on Iboxs equipment, and is applicable to fully dull and bright yarns.
Detail
General Properties
Appearance: Yellow transparent oily liquid
Oil Content: 90% ± 2%
pH Value: 6.5–8.5
Kinematic Viscosity (30℃, mm²/s): 30–60
Product Properties
The oil is uniform and stable, with high film strength and excellent permeability.
It has good high-temperature resistance, with no coking during application. Therefore, there is no need to specially clean godets, drawing rollers, etc., avoiding yarn breakage and loose fibers caused by coking.
It has excellent thermal stability, with little volatile fumes under domestic operating process conditions. It will not increase production costs due to the volatilization of the oil, does not pollute the environment, and does not harm the health of operators.
There are few deposits on the hot roller, and the dyeing performance is good. Even for thick yarns, it has a good M-value. For fine yarns, a high dyeing M-value can be obtained with a small draw ratio.
It has excellent antistatic properties, and the antistatic agent is well compatible with most common sizing agents. It also has good adaptability to high-speed warp knitting, and no static electricity will be generated even in low-temperature and dry seasons.
The oil emulsion has good wettability to the yarn bundle, enabling the high-speed running yarn bundle to quickly absorb the oil, which spreads rapidly on the fiber surface to achieve uniform oiling. It has good spinnability, with few intermediate breakages and switching breakages.
The oil can endow the fiber with good friction performance, increase the friction coefficient between fibers, ensure good bundling of fibers, reduce the rate of yarn defects, and facilitate the processing of profiled fibers.
